Korvilon

Painting and Finishing

A fresh coat of paint can brighten a room, tidy up worn trim, or give a plain shelf a new look. Korvilon’s painting and finishing guides help you plan manageable projects, choose suitable materials, and build confidence with a brush or roller.

Prepare the Surface First

Good preparation gives paint a sound base. Protect floors and nearby furniture, clean away dirt and grease, and let the surface dry. Fill small holes with a suitable repair compound, allow it to set, and smooth the repaired areas before removing dust.

Primer requirements depend on the surface and coating. Bare materials, stains, and glossy finishes may need different treatments; Sherwin-Williams’ surface preparation guide explains these differences.

Choose Paint for the Job

Start with the material you are painting and whether it is indoors or outdoors. Then consider the finish:

  • Flat or matte: Low shine that helps make minor surface imperfections less noticeable.
  • Eggshell or satin: Common choices for walls, with washability depending on the product.
  • Semi-gloss: Often used on doors and trim for a more reflective finish.

Check the product’s suitability for moisture, frequent cleaning, and everyday wear. Benjamin Moore’s paint finish guide compares common sheens and their uses.

Build Your Brush and Roller Skills

Use a brush for corners, edges, and detailed areas, then a roller for larger sections. Match the brush and roller cover to your paint and surface; the Sherwin-Williams DIY painter’s handbook covers these basic tool choices.

Work in manageable sections, spread paint evenly, and avoid overloading your tools. Follow the label’s coverage and recoating instructions rather than trying to hide everything beneath one heavy coat. Leave time for preparation, application, and drying when planning your project.

Start with a Simple Finishing Project

A small shelf, picture frame, or section of trim offers a useful place to practise. For wood projects, decide whether you want paint to cover the grain or a compatible stain and clear finish to keep it visible.

Test your chosen finish on scrap wood or a hidden area first. Follow the manufacturer’s curing instructions before putting the finished item into regular use.